Top 5 Benefits of Using IP Speakers in Industrial Facilities

Top 5 Benefits of Using AKOM’s IP Speakers in Industrial Facilities

In this industrial environment, can you say with confidence that your communication channel is clear, which enables timely messages without any inconveniences? Are you sure that your current PA (Public Address) system can efficiently handle the needs of growing facilities? If your system is not up to the mark of the increasing safety demands and operational complexities, then you need to find a reliable communication system. This is possible with IP speakers, which are a network-based solution, scalable to give a trek to clear sound across critical facilities. 

If you want to know more, go deeper into this guide and explore things about the same that you must know before installing or upgrading the same. Let’s start with a few key benefits of IP speakers!

1. Easy Network Integration

IP speakers are connected to the Ethernet that supports power over Ethernet, and there is no need for additional cables or an amplifier. It is a very simple installation that comes with affordable pricing, which makes it ideal as the communication infrastructure for modern industries. 

2. Instant Real-Time Communication

The IP speakers come with very few changes of lag time, also share real-time announcements and emergency alerts at the exact time of any inconvenience. This feature of this communication system also makes sure that the safety messages and instructions will reach all the areas that enhance the response and coordination inside the industrial setup. 

3. Centralized Audio Management

The IP speaker communication system activates the centralized control over messaging, with this facilitators are allowed to adjust volume, schedule broadcasting, and can also target a specific department. Thus, even if you want to enhance the communication with precision across a large area, this can be a better communication approach for you. 

4. Scalable for Future Growth

The communication setup with IP speakers allows full flexibility to target the broad audio coverage as per the expanding needs or growth of an industry. Where IP speakers are integrated with the IP-based systems that support modern needs, with no further changes in the existing infrastructure. 

5. Clear Sound in Noisy Environments

The efficient setup of IP speakers delivers a clear and qualitative band of audio. This is possible because of its advanced features, such as voice cancellation and strong amplification in the advanced models of IP speakers such as SP15/SP15P and SP30/SP30P, which make the sound accurate even if it is a busy factory floor or a warehouse.

Best Practices for IP Speaker Installation in Industrial Facilities

The accurate installation of the IP speaker is a prime pillar to maximize the overall performance of your communication infrastructure. Below are the best practices that you need to consider to proceed properly:

• Always prefer to make use of PoE-integrated switches, which will power up the speakers and reduce the need for extra cabling.  
• Placing the speakers strategically is a good practice to get sound coverage with no obstacles. 
• To be more precise, first configure the network settings and set up by prioritizing the audio traffic, which will allow you to maintain the accuracy with minimal latency.
• Segment the audio zones as required, and prefer logics to match the communication infrastructure with the operational needs.
• Once you make the precise installation, don’t forget to test the system before going live. 

Comparison: IP Speakers vs Traditional PA Systems

The  IP speakers come with distinct perks and advantages in comparison with the traditional PA system, especially when it is about an industrial environment. Let’s compare both and understand the real difference:

• Installation: The IP  speakers are similar to the Ethernet infrastructure, which is different from analog systems that demand extensive cabling.
   
• Scalability: The precise installation of IP speakers can be easily expanded with no hardware transformation, whereas traditional communication setups require costly realignment. 
   
• Management: The IP systems are more centralized, allowing remote control, whereas analog PA systems are localized and traditional.
   
• Audio Quality: IP communication systems provide superior clarity because of its advanced features; however, analog models of communication systems are not this much clear.
   
• Integration: The seamless integration of IP-based systems into the IP speakers allows a unified communication setup, which is not possible to achieve in the case of traditional PA.

Transform Industrial Communication Today

Integrating IP speakers with the modern communication system into an industry comes with so many benefits such as live communication, seamless integration, centralized management, clearer audio quality, and much more. If you want to install such a safe, valuable, and future-proof communication infrastructure, choose AKOM, a leading platform to modernize any industrial environment. 
 

Are you ready to upgrade your industrial communication setup to a more reliable, scalable, and efficient solution with models like SP15/SP15P or SP30/SP30P? Get in touch with AKOM Technologies via +91-9811829876 or email sales@akom.in and request a personal consultation now!

Quick Enquiry With Our Associate

⭐⭐⭐⭐⭐ (4.8)

Call Now ↺ Chat With Us �� See Product